Skip to main content
Hide

Abrites BN016 Key Learning for BMW F-Series FEM/BDC/CAS4

Abrites BN016 Key Learning for BMW F-Series FEM/BDC/CAS4-0 thumb
DG-ABR-BN016

Abrites BN016 Key Learning for BMW F-Series FEM/BDC/CAS4

$1,655.00

  • Digital Product
  • New Arrival
Abrites SKUBN016
BrandAbrites
Product typeSoftware licence
FunctionKey programming — spare key and all keys lost; BDC adaptation
Vehicle makesBMW, MINI, Rolls-Royce
FitsF-series with CAS4, FEM or BDC (v85+ included): 1–7 Series, X1, X2, X3, X4, X5, X6, MINI F54–F60, Rolls-Royce Ghost / Wraith / Dawn 2009–2016
Working methodOBDII for CAS4 and BDC cars
RequiresAVDI interface with active annual subscription (AMS)
Also requiredBN012 for all keys lost
Additional hardwareZN103 PROTAG, CB015 ENET cable
AvailabilityDelivered electronically

Abrites BN016 includes key programming for BDC versions 85 or higher by OBDII. The licence performs key programming procedures — adding a spare key and all keys lost — on BDC and CAS4 F-Series BMW vehicles by OBD, and on FEM cars. Abrites describes the CAS4 and BDC cars as done completely via OBDII; FEM cars are listed separately, without that claim, so do not assume an OBDII-only procedure on FEM.

Main functionalities

  • Key programming for F-series vehicles with BDC or CAS4 — by OBDII (BDC versions 85 and higher included)
  • Key programming for F-series vehicles with FEM
  • Adaptation of BDC modules by OBDII for F-series

Other functionalities

  • Mileage calibration (dashboard excluded)
  • ISN read, write and change

Supported vehicles

CAS4 cars — completely via OBDII

  • 7 Series and 7 Series L — F01, F02
  • 5 Series and Touring — F10, F11
  • 6 Series Coupe, Convertible and Gran Coupe — F12, F13, F14
  • X3 and X4 — F25, F26
  • CAS4 Rolls-Royce — Ghost, Wraith, Dawn (2009-2016)

FEM cars

  • 1 Series — F20, F21 (and F52 for the Chinese market)
  • 2 Series — F22, F23, F45, F46 and F87 (M2)
  • 3 Series — F30, F31, F34, F35 and F80 (M3)
  • 4 Series — F32, F33, F36, F82 and F83 (M4)

BDC cars — completely via OBDII

  • BMW X1 (F48)
  • BMW X2 (F39)
  • BMW X5 (F15)
  • BMW X6 (F16)
  • MINI Clubman (F54)
  • MINI Hatch (F55 / F56)
  • MINI Convertible (F57)
  • MINI Countryman (F60)

What you need alongside it. To carry out the key programming procedures you will need the ZN103 PROTAG programmer, and the CB015 BMW ENet cable is strongly recommended. In all keys lost situations the BN012 licence is also required, because that is what reads the ISN from the DME/DDE. For bench work on the module itself, the ZN151 Distribution Box Set is the usual companion.

An AVDI interface with an active annual subscription is required to use this licence. Delivered electronically; your AVDI serial number is needed to process the order.