Abrites Full Software and Hardware Bundle for BMW, MINI and Bikes
.jpg)
| Function | Key programming, advanced coding, immo parts and 8HP adaptation, BDC2 replacement, BMW bikes |
| Vehicle makes | BMW, MINI, BMW Motorrad |
| Requires | Active AVDI annual subscription (AMS) to use the licences |
| Availability | Hardware ships; software delivered electronically |
Abrites / Key Programmers
The Abrites Full Software and Hardware Bundle for BMW, MINI and Bikes is the complete all-in-one kit for BMW work. It combines the AVDI Plus and PROTAG with the full Abrites BMW software range and every bench lead Abrites includes for it — 15 items in one order, priced well below the cost of buying them separately.
What you can do with it
- Key programming — spare key and all keys lost on F-series cars with CAS4, FEM or BDC (BDC v85+ by OBDII), plus spare keys on F- and G-series BDC2 cars and renewal of used original 434 MHz keys
- Advanced coding — DME/DDE ISN reading, module flashing, coding, vehicle order configuration and FSC codes on E-, F- and G-series
- Immo parts adaptation — EGS / TCU adaptation, ZF8HP Gen3 set to virgin, and Bosch MG/MD ECU adaptation by DFlash dump
- BDC2 replacement — transfer data from a faulty BDC2 to a replacement on the bench and reset its mileage to 0 km
- BMW bikes — key programming, VIN change and immobiliser adaptation on EWS, HUF and X_SLZ systems
What’s in the bundle
Software licences
- BN012 Advanced Coding Functionality for BMW
- BN016 Key Learning for BMW F-Series FEM/BDC/CAS4
- BN017 Key Programming and Immobiliser Adaptation for BMW Bikes
- BN018 Immo Parts Adaptation for BMW including 8HP Gen3 Virgin
- BN020 Key Programming for BMW G-Series and F-Series BDC2
- BN022 BDC2 Replacement and Mileage Reset for BMW
Interface and programmers
- AVDI Plus vehicle diagnostic interface
- ZN103 PROTAG key and transponder programmer
- ZN130 ABPROG Programmer Set
- ZN151 Distribution Box Set
BMW cables
- CB015 BMW ENET cable
- ZN095 BDC2 bench connection cable
- CB013 MSD/MSV bench connection cable set
- CB023 MD/MG ECU connection cable
- ZN079 ZF 8HP TCU connection cable
Good to know
- BMW bike work with BN017 also needs the SET307 direct CAN-BUS set for BMW bikes, which is not included.
- The ZN079 needs a bench power supply such as the ZN063 12V / 1A adapter, sold separately.
- The software licences need an active AVDI annual subscription to run. Licences are delivered electronically.
- Already have an AVDI and PROTAG? The BN00F Full Software Package for BMW gives you the same six licences on their own.