AccuReader For Ford 10-Cut FORD10 H54 / H60

This Set designed to read actual depths for spaces 1-6 of the Ford 10-cut locks.

This system will allow you to read spaces 1-6 in the Ford 10 cut door locks. It takes only minutes to read the depths for each cut in each position of a given lock.
The AccuReader works on the process of elimination to decipher the correct depths of the lock. By checking the deepest cut first you eliminate what the cuts are not. Therefore it is essential to always read depth slide #5 first.

The Ford10 AccuReader comes with a set of slides #2-5. Also supplied are two AccuReader keys, one is for reading spacing 6-4 and one is for reading 3-1. Within the lock there is a warding the key slides on. Once the key is pulled out a certain distance the key can shift off of this warding and give improper readings. Therefore, it is important to use the correct key for the correct spacing.

Package Contents:

• 1-AccuReader key (6-4)
• 1-AccuReader key (3-1)
• 1-insertion/release slide
• 1-depth slide #5
• 1-depth slide #4
• 1-depth slide #3
• 1-depth slide #2
• 1-Tube storage container
• 1-Tube Cap